Menu
OVERALL CONCEPT AND GEOMETRY
The new EKANO 2 AL is the next evolutionary step of the first PROPAIN E-Bike. We have been able to transfer our proven PRO10 system to an e-mtb. This results in a significantly lower center of gravity and improves the kinematics considerably.
Handling and downhill performance were absolutely paramount in the development. That’s why we didn’t engage in the “who has the biggest battery” competition. A relatively low overall weight with optimal weight distribution gives the new EKANO 2 AL a playful and agile “spindrift-like” behavior on the trail. The new Shimano EP801 delivers 80 watts more peak power than its predecessor and that over a wider cadence range. Paired with the 3.3 kg lightweight 626 Wh battery and the from the ground up new frame design, this hits exactly the sweet spot for maximum fun both uphill and downhill.
170 mm of travel at the rear and optionally 180 mm or 190 mm at the front, reach values adapted to our product range, a slightly flatter head angle of now 64° and a steep seat angle of 78° result in the modern geometry of our E-Freerider. The EKANO 2 AL is available exclusively in a mixed-wheel setup. The small rear wheel and the medium length chainstays of 445 mm round off the playful handling.
No matter if party laps in the bike park, exploring trails far away from where you usually ride or even on more mellow home trails – the EKANO 2 AL is the absolute fun machine no matter in which direction.
FRAME CONCEPT PRO10
We are convinced that our PRO10 system represents the best frame concept. To now transfer it entirely to an E-Bike for the first time has opened up new possibilities. The 205/60 trunnion mount shock makes efficient use of the space between the redesigned links and the EP801 motor. This raises the kinematics to the level of Tyee and Spindrift, while taking into account the higher weight of the E-Bike.
Due to the repositioned shock and the optimal integration of the motor and battery, the EKANO 2 AL has a maximally low and central center of gravity. This makes the weight very inconspicuous and the handling of the bike super close to our non-motorized models.
INTEGRATED CABLE ROUTING
Our Integrated Cable Routing “ICR”, developed together with Sixpack is also featured on the new EKANO 2 AL. The stem is CNCmachined in Germany and forms a molded fit to the top composite spacer. The cables therefore do not pass through the stem, but through a pinch-through seal underneath the stem into the top spacer, through the headset, and into the frame. Thus, the stem can be replaced effortlessly if necessary and the cockpit height can be adjusted by clip-in spacers, without having to remove the stem.
To make the system as durable as possible in addition to the seal at the cable entry, an additional IPS seal is mounted on the upper headset bearing. To make the system absolutely bullet-proof stainless steel bearings are used exclusively in all frames. Wear in the headset is therefore absolutely no issue with our ICR system.
BRAKE INTEGRATION
With the new EKANO 2 AL, the 200 mm Postmount brake mount is integrated into the rear triangle. In addition to the sleek aesthetic aspects, this also achieves better transfer of braking forces into the frame.
A powerful 626 Wh battery comes into play in the EKANO 2 AL. The new 21700 lithium-ion cell generation achieves a remarkably high energy density. The cells store more energy in less space and weight. This makes the battery of the EKANO 2 AL significantly slimmer, more compact and lighter than other batteries in this class and exactly the right energy storage to achieve the best trail performance.
More information about E-TUBE PROJECT can be found at SHIMANO.
SIZE AND WHEELSIZE CONCEPT
The new EKANO 2 AL is available exclusively in mixed wheel setup. For our E-Freeride bike it was important to us to ensure a maximum range of motion with good rollover behavior at the same time. Therefore, “business in the front & party in the back” is without a doubt the best option. The EKANO 2 AL is available in sizes S, M, L and XL. The stack is deliberately kept higher across all four sizes to achieve ideal handling despite the extra weight of the motor and battery.
| SIZE S | SIZE M | SIZE L | SIZE XL | |
|---|---|---|---|---|
| Frame height (A) | 410 mm | 430 mm | 455 mm | 480 mm |
| Fork offset (B) | 44 mm | 44 mm | 44 mm | 44 mm |
| Fork length (C) | 598 mm | 598 mm | 598 mm | 598 mm |
| Head tube length (D) | 110 mm | 115 mm | 120 mm | 130 mm |
| Reach (E) | 435 mm | 455 mm | 475 mm | 495 mm |
| Stack (F) | 644 mm | 648 mm | 653 mm | 662 mm |
| Head angle (G) | 64° | 64° | 64° | 64° |
| Seat angle – real (H) | 77.2° | 77.2° | 77.2° | 77.2° |
| Seat angle – effective (I) | 78° | 78° | 78° | 78° |
| Top tube length (J) | 571 mm | 592 mm | 613 mm | 635 mm |
| BB offset (K) | R13 / F24 mm | R13 / F24 mm | R13 / F24 mm | R13 / F24 mm |
| Chainstay length (L) | 445 mm | 445 mm | 445 mm | 445 mm |
| Wheelbase (M) | 1,231 mm | 1,253 mm | 1,275 mm | 1,299 mm |
| Standover height (N) 200 mm | 830 mm | 825 mm | 820 mm | 818 mm |
| SIZE S | SIZE M | SIZE L | SIZE XL | |
|---|---|---|---|---|
| Frame height (A) | 410 mm | 430 mm | 455 mm | 480 mm |
| Fork offset (B) | 44 mm | 44 mm | 44 mm | 44 mm |
| Fork length (C) | 606 mm | 606 mm | 606 mm | 606 mm |
| Head tube length (D) | 110 mm | 115 mm | 120 mm | 130 mm |
| Reach (E) | 430 mm | 450 mm | 470 mm | 490 mm |
| Stack (F) | 647 mm | 651 mm | 656 mm | 665 mm |
| Head angle (G) | 63.6° | 63.6° | 63.6° | 63.6° |
| Seat angle – real (H) | 76.8° | 76.8° | 76.8° | 76.8° |
| Seat angle – effective (I) | 77.6° | 77.6° | 77.6° | 77.6° |
| Top tube length (J) | 573 mm | 594 mm | 615 mm | 637 mm |
| BB offset (K) | R10 / F21 mm | R10 / F21 mm | R10 / F21 mm | R10 / F21 mm |
| Chainstay length (L) | 445 mm | 445 mm | 445 mm | 445 mm |
| Wheelbase (M) | 1,235 mm | 1,257 mm | 1,279 mm | 1,303 mm |
| Standover height (N) 200 mm | 830 mm | 825 mm | 820 mm | 818 mm |
FRESH NEW COLORS
The EKANO 2 AL is available in the three colors „Raw“, „Olive Matte“, and „Jolly Aubergine“. Our aluminum Raw is coated with a special sealant and stands out with a noble matte finish. The Olive hue introduced on the Tyee 6 is now available in matte for the first time, and our „Jolly Aubergine“ is a brand new addition to the range. As before, the PROPAIN logo and badge can be individually customized. So everyone has the freedom to choose his favorite color combination. For the decal kit a very robust, plotted vinyl foil is used, the badge is made of very thin metal. All of the already known colors will still be available.
Become part of the PROPAIN community and receive all updates about our products, athletes and insights with our newsletter.
© 2024 Propain Bicycles GmbH
